Detailed information

Host overview
Jd450 tilting casting machine adopts PLC, travel switch control and hydraulic drive. It has the characteristics of high degree of automation, large opening force, stable and reliable work, large range of process parameter adjustment, simple and convenient operation, convenient loading and unloading of the mold, etc.
The mechanical part of jd450 tilting casting machine is composed of fixed mold support plate, fixed mold plate, top core plate, moving mold plate, moving mold support plate, guide pillar, guide sleeve, rotary support, buffer, limiter and base.
A gate shaped structure is composed of a movable template, a fixed template, a guide post, a guide sleeve and a connecting plate. The rotary shaft is connected with a bracket installed on the base through a rolling bearing, and the rotary oil cylinder pushes and pulls the bed to rotate horizontally to vertically. The top core part is installed on the fixed mold mounting plate by the top core plate and the mounting plate. Due to the sufficient rigidity of the gate shape structure, it can ensure the smooth operation of the larger die.
The moving die part is composed of moving die plate, guide pillar, guide sleeve, support and hydraulic cylinder. The template is guided by the guide post and guide rail, and driven by the oil cylinder to open and close.
The top core part is composed of top core plate, oil cylinder mounting plate, guide post and hydraulic cylinder. The top core plate is guided by the short guide post and pushed by the top core cylinder. The top core plate of the die also works from the static die.
9. Hydraulic part
Hydraulic system
All mechanical movements of jd600 tilting casting machine are realized by hydraulic system, which is composed of variable piston pump, electromagnetic directional valve, pipeline and executive hydraulic cylinder. Under the control of electrical system, all moving parts can work at predetermined working speed and output. The hydraulic cylinders are HSG K80 / 35 type cylinder for bed tilting movement, fa90x35x350 type cylinder for action template opening movement and fa80 / 60 type cylinder for top core movement.
1.5.1 electric control part
The electric control of jd600 tilting pouring machine is composed of power control part and program control part. The power part controls the start and stop of the hydraulic station. The program control part is mainly composed of PLC, analog module, inductive switch, etc.
8.1 technical parameters of main engine
8.1.2 maximum size of formwork frame 600 * 500 * 600
8.1.3. Maximum clamping force 40kN
8.1.4 maximum opening force 32KN
8.1.5 minimum closing height 350
1.3.5 maximum stroke of movable template 350
8.1.6 jacking oil cylinder output 38kn
8.1.7 table tilting angle 0-90 degrees
1.3.8 table tilting speed 8 ° / s ≤ V ≤ 4 ° / S
8.1.8 rated power of hydraulic station 3.75kw
8.1.9 the pressure level of hydraulic system is 6.5MPa
8.1.10 working pressure of hydraulic system 5.5-10mpa
8.1.11 control mode: manual and automatic