Detailed information

The equipment is supported by arc welding steel frame with low center of gravity, and the frame has enough span to ensure good stability of the equipment.
The mass inertia of the equipment movement will affect the stability of the equipment. In order to avoid the movement of the equipment due to accidental vibration, foot bolt holes are reserved on the equipment to fix the equipment.
2-2 design criteria of equipment size
All parts and connectors are designed with corrosion and wear aging in mind, providing sufficient strength requirements for normal operation of the equipment.
2-3 electrical safety
The three-phase power line from the power grid is led to the switch through the special channel in the electric control cabinet, and the terminal of the power line is equipped with a special plastic protective cover. Any live wire and terminal shall have an obvious warning sign. All components in the electric control cabinet adopt the protection standard of IP20. There are a series of special grounding terminals near all wires in the electric control cabinet. Each grounding terminal is connected to the same ground wire. The color of all wires in the electric control cabinet conforms to the current law. All terminals are of the same standard and are of the same type
The way is fixed. All motors adopt special magnetocaloric elements for over-current and overload protection. The main coil of transformer also adopts special magnetocaloric element for overload protection. There are self overload protection measures inside the electronic components. If the daily maintenance and use are carried out in strict accordance with the requirements of the manual, the electrical hazards can be completely eliminated.
2-4 hydraulic safety
The equipment is driven by hydraulic pump driven by motor, and the oil pressure is enough to drive the equipment. In addition to the action caused by the hydraulic cylinder drive, there is no other danger,
No oil pressure or voltage accumulator;
Both rigid and flexible tubing are of sufficient size to resist the expected maximum oil pressure, all tubing are fastened to the frame or tightly bundled with self-locking nylon ties to avoid accidental sudden stretching, and the flexible tubing is fixed in a position free from wear of moving parts. In any case, even if the oil pipe breaks, it will not cause harm to the human body, because the oil pressure and temperature in the circulation system are not very high.
Product attributes
Function and technical parameters of gravity casting machine
1. Maximum contour diameter of die: 500mm
2. The maximum weight of the mould is 150kg
3. The maximum distance between die plates is 510mm
4. The maximum clamping stroke is 270mm
5. Measuring pouring angle range: 0 ° - 90 °
6. The range of front pouring angle is 0-110 degrees
7. The immersion angle range of the mold is 0-90 degrees
8. Working oil pressure 50-70bar
9. Motor power 3.75 + 0.75 + 0.75kw
10. Three phase power supply 380V / 50Hz (except for special requirements of users)
11. Tank volume 220l
12. The volume of mould soaking tank is 375l + 375l
13. Net weight of equipment 2000kg
14. The maximum outline size of the equipment is 1650 * 2300 * 1720mm