Detailed information

Jd600-y tilting casting machine adopts PLC, travel switch control and hydraulic drive. It has the characteristics of high degree of automation, large opening force, stable and reliable work, large range of process parameter adjustment, simple and convenient operation, convenient loading and unloading of the mold, etc.
Mechanical part: jd-600y inclined casting machine part is composed of fixed mold support plate, top core plate, moving mold plate, moving mold support plate, guide post, guide sleeve, rotary support, buffer, limiter and base.
A gate shaped structure is composed of a movable template, a fixed template, a guide post, a guide sleeve and a connecting plate. The rotary shaft is connected with a bracket installed on the base through a rolling bearing, and the rotary oil cylinder pushes and pulls the bed to rotate horizontally to vertically. The top core part is installed on the fixed die press plate by the top core plate and press plate. Because the gate structure has enough rigidity, it can run smoothly when using larger mold.
The moving die part is composed of moving template, guide pillar, guide sleeve, support and hydraulic cylinder. The template is guided by the guide post and guide rail, and driven by the oil cylinder to open and close.
The top core part consists of top core plate, oil cylinder plate, guide post and hydraulic cylinder. The top core plate is guided by the short guide post and pushed by the top core cylinder. The top core plate of the die ejects the workpiece from the static die.
Hydraulic part
All mechanical movements of jd-600y tilting casting machine are realized by hydraulic system. The whole hydraulic system is composed of variable vane pump, electromagnetic directional valve, pipeline and executive hydraulic cylinder. Under the control of electrical system, all moving parts can work at predetermined working speed and output. The hydraulic cylinders are respectively HSG K90 / 45 type cylinder for bed tilting movement, fa65 / 125 × 152 × 600 type cylinder for action template opening movement and fa50 / 100 × 120 × 50 type cylinder for cylinder top core movement.
Electric control part
The electric control of jd-600y tilting pouring machine is composed of power control part and program control part. The power part controls the start and stop of the hydraulic station. The program control part is mainly composed of PLC, analog module, rotary encoder, etc.
Product attributes
Main technical parameters:
1. The maximum size of die is 800 × 550 × 40
2. The maximum clamping force is 65kn
3. The maximum opening force is 50kN
4. Minimum closing height 300
5. Maximum stroke of movable template 600
6. The output of top core oil cylinder is 30KN
7. The tilt angle of the worktable can be set arbitrarily within the range of 0 ~ 90 degrees
8. Table tilting speed 8 degrees / s ≤ V ≤ 4 degrees / S
9. The rated power of hydraulic station is 3.7KW
10. The pressure grade of hydraulic system is 6.3MPa
11. The working pressure of hydraulic system is 5.5mpa
12. The control mode is manual and automatic